banner
FLEX AND RIGID-FLEX LAYER STACKUP TYPES
2020/09/01

Type 1 – Single Layer

Single-sided flexible wiring containing one conductive layer and one or two polyimide outer cover layers.

  • One conductive layer, either laminated between two insulating layers or uncovered on one side.
  • Access holes to conductors can be on either one or both sides.
  • No plating in component holes.
  • Components, stiffeners, pins and connectors can be used.
  • Suitable for static and dynamic flex applications.

A Type 1 flex structure with 2 cover layers, access holes on both sides and no plating in the in the component holes.


Type 2 – Double Layer

Double-sided flexible printed wiring containing two conductive layers with plated through holes, with or without stiffeners.

  • Two conductive layers with an insulating layer between; outer layers can have covers or exposed pads.
  • Plated through-holes provide connection between layers.
  • Access holes or exposed pads without covers can be on either or both sides; vias can be covered on both sides.
  • Components, stiffeners, pins and connectors can be used.
  • Suitable for static and dynamic flex applications.

A Type 2 flex structure with access holes on both sides and plated through holes.


Type 3 – Multilayer

Multilayer flexible printed wiring containing three or more conductive layers with plated-through holes, with or without stiffeners.

  • Three or more flexible conductive layers with flexible insulating layers between each one; outer layers can have covers or exposed pads.
  • Plated through-holes provide connection between layers.
  • Access holes or exposed pads without covers can be on either or both sides.
  • Vias can be blind or buried.
  • Components, stiffeners, pins and connectors can be used.
  • Typically used for static flex applications.

A Type 3 flex structure with access holes on both sides and plated through holes.


Type 4 – Multilayer Rigid-Flex

Multilayer rigid and flexible material combinations (Rigid-Flex) containing three or more conductive layers with plated-through holes. Rigid-flex has conductors on the rigid layers, which differentiates it from multilayer circuits with stiffeners.

  • Two or more conductive layers with either flexible or rigid insulation material as insulators between each one; outer layers can have covers or exposed pads.
  • Plated through-holes extend through both rigid and flexible layers (apart from blind and buried vias).
  • Access holes or exposed pads without covers can be on either or both sides.
  • Vias or interconnects can be fully covered for maximum insulation.
  • Components, stiffeners, pins, connectors, heat sinks, and mounting brackets can be used.

A Type 4 rigid-flex structure, the rigid sections are formed by adding rigid layers to the outside of the flex structure.

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

products

about

contact